Notes
- Please handle the glass components with care to avoid damage or injury.
- Despite efforts for accuracy, there may be some reasonable error due to manual measurement.
- Actual product colours may vary due to monitor settings & lightings.

Installation Steps
1. Measure and Mark the Position: Use a tape measure and spirit level to mark the installation position, ensuring it is level and vertical.
2. Drill Holes: Choose the appropriate drill bit for the wall material (e.g., tile, plasterboard) and drill holes at the marked locations.
3. Clean the Holes: After drilling, use a brush or vacuum cleaner to remove dust and debris from the holes.
4. Install the Brackets or Metal Frame: Fix the brackets or metal frame to the wall, ensuring they are secure.
5. Install the Glass Panel: Install the glass panel into the frame, ensuring a tight fit.
6. Apply Sealant: Apply an even layer of waterproof sealant on the necessary surfaces.
7. Clean Excess Sealant: Gently remove excess sealant with a scraper to keep the surface tidy.
8. Allow Sealant to Cure: Wait for 24 hours to allow the sealant to fully cure.

Installation Cautions
- Ensure accurate markings to avoid misalignment during installation.
- Ensure accurate hole placement to avoid hitting pipes or wires. Control the drilling depth to prevent damaging the wall.
- Keep the holes clean to ensure a secure installation.
- Use the correct screws and tools to avoid any looseness.
- Use high-quality waterproof sealant and avoid over-applying to prevent overflow and damage to aesthetics.
- Ensure the glass panel is securely fixed and properly aligned.
- Clean before the sealant dries completely to avoid leaving marks.
- Avoid using the shower before the sealant is completely cured.