Notes:

- Remove the heater and its accessories from the packaging and inspect them for any damage that may have occurred during transportation, especially damage to the power cord. If any damage is found, do not use the heater.

- Before connecting the power supply, check that the voltage of the power source matches the voltage indicated on the heater’s nameplate. Ensure that the electrical outlet can safely handle the current and power requirements specified on the nameplate.

- Place the heater on a stable, level surface in an open area, at least 90 cm away from other objects. Do not place it on unstable or soft surfaces, such as beds or thick carpets.

- Despite efforts for accuracy, there may be some reasonable error due to manual measurement.

- Actual product colours may vary due to monitor settings & lightings.

Cleaning & Maintenance:

- Before performing any maintenance, unplug the power cord and allow the product to cool completely before proceeding.

- Wipe the surface of the product with a soft, damp cloth, then dry it with a clean, dry cloth. Do not allow water or moisture to enter the interior of the heater.

- Use a brush to clean the gaps around the heat sink and any areas around the convection vents that are difficult to reach with a cloth.

- Do not polish the surface with sandpaper, apply wax, or use organic solvents such as gasoline or benzene or acidic or alkaline cleaners, as these may cause discolouration or surface deterioration.